Sexy Floors Cementious Floors Press Release
What are cementious floors?
Cementious floors are a blend of products that enables the repair of existing concrete floors. These products come in several different types for different repairs.
What are the advantages of cementious floors?
Short downtime while achieving a smooth surface for the laying of epoxy and polished concrete floors. Cementious floors can also be used under epoxy floors to create falls to wastes.
What areas are best suited to cementious floors?
Cementious floors are generally used under epoxy floors to repair or level existing concrete floors. There are cementious products available for the repair of warehouse floors that enable rapid repair with short downtime.
Fixing Deflection In Slabs
WEIGHT OF CEMENT TOPPING
WEIGHT OF OUR PRODUCT
110 – 150 kg
50 – 60 kg
Clearly, this is a huge weight saving!
As buildings become older, the incidence of deflection in slabs in high and low rise buildings is occurring more frequently. This deflection is usually not noticed until refurbishment or renovations happen and then become a problem when new walls, fittings and floor coverings need to be laid or installed.
Minor deflection under 15mm is not normally a problem, but once the deflections are over 15mm, the floor levels can become critical.
The incidence of deflection from 15 – 80mm and above is not uncommon; the problem is how to fix it?
Traditional methods have been to use a cement topping mix comprising of sand, cement and stone, but, depending on thickness and distance between beams, this can and generally does cause further deflection due to the weight of materials used.
Furthermore, if the slab is not prepared properly, delamination or druminess can occur causing cracking and the subsequent release of the topping. Although this is generally not a problem under carpet, it can be a disaster when tiles or marble finishes have been laid. With traditional mixes the topping can only be laid down to a thickness of approx 30mm and then cementious products need to be used to feather out at edges.
Weight of a Traditional topping mix can vary from 2200 kg m3 up to 3000kg m3
(Based on 50mm thick a topping would weigh between 110kg- 150 kg m2 )
For example, 25 mm average thickness on a 50 m2 floor would require 2750 kg of topping.
Ask yourself: What sort of stress would that place on the building?
By using a blend of Cementious products, we have developed a product that cuts the weight of topping mixes down to 1000 kg – 1200 kg M3.
This product offers a greater adhesion to existing slabs along with a higher compressive strength than traditional toppings with a thickness varying from 0-120mm.
Sexy Floors Australia introduces you to a new and exciting brand of flooring.
At Sexy Floors Australia you design it and we create it, with all workmanship fully covered by Insurances and meeting strict Workplace health and safety standards.
Our new range of non-slip flooring, available in gloss and satin finishes, meets all Australian Standards for Flooring: Inside and Outside.
- R Rating Certificate for R9-R13
- Fire Testing AS/NZS 1530.3 – 1999
- Toxicity Non Hazardous
- UV inhibitors
- Flammability Non Flammable (100% Solid Epoxy)
- Members of the GECA, HIA, Master builders and QBSA 622477
Sexy Floors is known for its stunning metallic colors; aluminum, bronze and copper, as well as its captivating, unique designs. We specialize in designer epoxy flooring for domestic, commercial and industrial flooring and can estimate and specify any project within Australia and overseas. Trades and businesses ask about our franchising available Australia wide.
We hope you have a chance to look into our product and should you require further information please do not hesitate to call Kelvin on 0412 362 416 or 1300 789 821 anytime. Discounts given for terms and conditions.
Sexy Floors Australia Team
Kelvin Shaw QBSA 622477
Winners of HIA Greensmart Award for “Product of the Year 2010”
Winner – Flooring Magazines – Most Innovative Flooring Product 2007
Sexy Floors Australia® – environmentally friendly epoxy No VOC’s
Tags: cement floor